Planning to install drywall in your house? Whether you are a new homeowner or a DIY enthusiast, you should understand that drywall installation in New York is not an easy task. There are a lot of elements that go into conducting the task smoothly and efficiently. If it’s done right in the first go, then Great Job! But if anything goes wrong, you have to put in extra money.

That’s why it’s better to contact professional contractors to get the job done. Here in this blog, we will walk you through a step-by-step guide on how professionals successfully install drywall. Let’s get started. 

What Will You Learn

• Why Should You Use Drywall? Top 5 Benefits
• How to Prepare the Space for Drywall Installation?
• Step-by-Step Guide on Hanging Drywall
• Tips and Tricks for a Flawless Drywalling

Why Should You Use Drywall? Top 5 Benefits

Check this list of benefits that drywall provides to get a basic understanding of what you are dealing with:

1. Quick and Easy Installation

Drywall is lightweight, easy to cut, and fast to install, which significantly reduces labor time compared to older methods like plastering. Therefore, making it ideal for both small renovations and large-scale builds.

2. Cost-Effective

Drywall costs are relatively lower compared to the cost of other types of wall materials, which makes it cheaper. It further consumes less work time, which is useful in reducing the total expenditure of the project.

3. Fire Resistance

The majority of dry walls are produced using a non-combustible gypsum core that has the advantage of holding back the spread of fire, which is an additional safety measure in your facility.

4. Soundproofing Qualities

Drywall, when used in two layers or together with insulation, may provide excellent dampening against sound, leading the indoor area to be quieter and more privacy-friendly.

5. Smooth and Versatile Finish

Once installed and finished, drywall provides a smooth surface that can be painted, wallpapered, or textured, allowing you to achieve any design style you want.

How to Prepare the Space for Drywall Installation?

Before diving into the drywall installation in New York, you need to prepare the space:

Before starting the drywall installation in New York, you need to prepare the space:  

Clear Up the Room

Remove all furniture, décor, and obstacles from the room. This will give the professionals enough space to work and keep dust from settling on your things. Place protective coverings on the floors to simplify cleanup after installation.  

Inspect the Walls

Check the wall framing for any damage, rot, or pests. Fix these problems before moving forward to avoid affecting the drywall’s stability and lifespan.  

Install Insulation

When the wall cavities are open, adding insulation can boost energy efficiency and provide soundproofing. Make sure it fits tightly without any gaps or overlaps.  

Locate Studs

Use a stud finder and mark the locations of the studs on the back of the framing. This guide will help the contractor nail the sheets of drywall perfectly.

Mark and Measure

Take precise measurements of the wall height and width to determine the number and size of drywall sheets required. Mark reference lines for alignment to make the installation smoother.

Step-by-Step Guide on Hanging Drywall

Check out this step-by-step guide on how professionals hang drywall:

• Start with the Ceiling

Professionals always start drywalling from the ceiling and then move towards the walls. Therefore, ensuring that the wall sheets can support the ceiling sheets and create a cleaner joint line.

• Cut Openings

The drywall installation contractors in NYC measure and cut openings for light fixtures, vents, and electrical boxes using a utility knife or drywall saw before securing the sheets in place.

• Hang Drywall on Walls

Then they place the sheets of drywall either horizontally or vertically in accordance with the size of the room. They take the sheet and place it snug in a corner and proceed along the wall.

• Secure the Drywall with Screws

The sheets are attached to the studs with drywall screws, with each screw sunk in the surface about halfway without cracking the layer of paper.

• Apply Joint Compound

Put a thin layer of joint compound over seams and screw heads. This helps to create a smooth and even surface for painting or finishing.

• Tape the Joints

Place drywall tape over seams and embed it into the compound. This strengthens the joints and prevents future cracking.

• Add Additional Layers

Apply at least two more coats of joint compound, sanding lightly between each coat to achieve a smooth, seamless finish.

Tips and Tricks for a Flawless Drywalling 

Planning to do it on your own, here are some tips that might help you:

• Avoid Over-Sanding

Over-sanding may destroy the drywall paper and result in lumpy spots, all the while smoothing out flaws.

• Keep Drywall Clean

Brush off dust and debris before primer or paint. A clean surface provides improved adhesion and a professional finish.

• Apply Primer

Priming the drywall before painting is always a good choice. Primer seals the surface, prevents and ensures uneven absorption of paint, and increases the life span of paint.

• Use Backer Boards

Use moisture-resistant backer boards instead of regular drywall in wet places like bathrooms, since both water and mold can damage them.

Final Thoughts

Now you must have understood how much work installing drywall on your own requires. You would need professionals with extensive experience in drywall installation in New York to handle the task. They won’t only complete the project on time, but you will also enjoy peace of mind, knowing everything is going smoothly. 

Make sure to:

• To trust the professionals you hired.
• Drywall installation takes time to finish, so be patient!